Hi all
I recompiled nut and now have newhidups
/etc/init.d/upsd start
* Caching service dependencies
...
[ ok ]
* Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
No matching USB/HID UPS found
Driver failed to start (exit status=1)
* Failed to start UPS
drivers!
[ !! ]
* ERROR: Problem starting needed services.
* "upsd" was not started.
the upsdrvctl part seems now to move further along ?
Jonathan Dion wrote:
Hello Barry.
On 7/31/06, *Barry Fawthrop* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Thanks Charles
Now I'm getting this error when starting
* Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools: HID UPS driver 0.13 (2.0.3)
Warning: This is an experimental driver.
Some features may not function correctly.
/dev/usb/hiddev0 is not a UPS
Driver failed to start (exit status=1)
# lsusb
Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd
Bus 001 Device 001: ID 0000:0000
/dev/usb/hiddev0 is the UPS I'm sure (but not 100%)
Thanks
Barry
_______________________________________________
Nut-upsuser mailing list
[email protected]
<mailto:[email protected]>
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
You should try to use the newhidups driver, which allow you to put the
port to auto :
ups.conf
=========
[Ultra1]
driver = newhidups
port = auto
Cheers,
Jonathan Dion
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.5/403 - Release Date: 7/28/2006
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
