Hi ! I see two problem in your configuration :
On 8/16/06, Martin Ivanov <[EMAIL PROTECTED]> wrote:
Hello! After I type "upsmon", in syslog the following message appears: Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [EMAIL PROTECTED] Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied Can you tell me where my error is, my configuration files are: ups.conf: [Inform] driver = powercom port = /dev/ttyS0 desc = "inform guard" linevoltage = 220 type = KIN1500AP upsd.conf: ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACCEPT localhost REJECT all ups.users:
The file containing the users information should be nammed upsd.users don't forget the "d"
root
User names declaration must be in bracket, like the ups declaration : [root]
password = pwd allowfrom = localhost actions = SET instcmds = ALL marto
Same here : [marto]
password = pwd allowfrom = localhost upsmon master upsmon.conf: MONITOR [EMAIL PROTECTED] 1 marto pwd master Thank you very much in advance. Regards, Martin ----------------------------------------------------------------- http://ide.li/ - портал за българите по света. Статии, новини, форуми, снимки, информация. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
Like this, the parser didn't recognize user declaration. It interprets all the lines as global settings, and as upsd don't support any global setting for users for the moment, it drops it (without any warning message). Then upsd don't know any user. Upsd don't verify if users have been declarated, so no warning message neither (For some tools like upsc for instance, users declaration aren't needed) So of course upsd rejects upsmon when it try to connect with user marto. Cheer, Jonathan Dion
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
