*********************** Your mail has been scanned by InterScan MSS. ***********************
Has anyone managed to get this UPS to work? I am using the laster development nuts. My /proc/bus/usb/devices content: ==== cut ==== T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=ffff ProdID=0000 Rev= 1.00 S: Manufacturer=UIS Ablerex S: Product=Ablerex USB Interface 049e C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 0 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) ==== cut ==== "newhidups -DD -u root -x generic -x vendorid=ffff auto" gave me this: debug level is '2' Checking device (FFFF/0000) (001/002) - VendorID: ffff - ProductID: 0000 - Manufacturer: UIS Ablerex - Product: Ablerex USB Interface 049e - Serial Number: unknown - Bus: 001 Trying to match device Device matches HID descriptor retrieved (Reportlen = 632) Report descriptor retrieved (Reportlen = 632) Found HID device Report Descriptor size = 632 Detected a UPS: UIS Ablerex/Ablerex USB Interface 049e Using subdriver: GENERIC HID 0.1 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Path: 00860004.Flow.FlowID, Type: Feature, Value: 0.000000 Path: 00860004.Flow.ConfigVoltage, Type: Feature, Value: 0.000000 Path: 00860004.Flow.ConfigFrequency, Type: Feature, Value: 0.000000 Path: 00860004.Flow.LowVoltageTransfer, Type: Feature, Value: 0.000000 Path: 00860004.Flow.HighVoltageTransfer, Type: Feature, Value: 0.000000 Path: 00860004.Flow.iManufacturer, Type: Feature, Value: 0.000000 Path: 00860004.Flow.iProduct, Type: Feature, Value: 0.000000 Path: 00860004.Flow.iSerialNumber, Type: Feature, Value: 0.000000 Path: 00860004.Flow.FlowID, Type: Feature, Value: 0.000000 Path: 00860004.Flow.ConfigVoltage, Type: Feature, Value: 0.000000 Path: 00860004.Flow.ConfigFrequency, Type: Feature, Value: 0.000000 Path: 00860004.Flow.ConfigApparentPower, Type: Feature, Value: 0.000000 Path: 00860004.Flow.ConfigActivePower, Type: Feature, Value: 0.000000 Path: 00860004.Flow.DelayBeforeStartup, Type: Feature, Value: 0.000000 Path: 00860004.Flow.DelayBeforeShutdown, Type: Feature, Value: 0.000000 Path: 00860004.BatterySystem.BatterySystemID, Type: Feature, Value: 0.000000 Path: 00860004.BatterySystem.PresentStatus.Used, Type: Feature, Value: 0.000000 Path: 00860004.BatterySystem.PresentStatus.Good, Type: Feature, Value: 0.000000 Path: 00860004.BatterySystem.Voltage, Type: Feature, Value: 0.000000 Path: 00860004.BatterySystem.Temperature, Type: Feature, Value: 0.000000 Path: 00860004.BatterySystem.Test, Type: Input, Value: 0.000000 Path: 00860004.BatterySystem.Test, Type: Feature, Value: 0.000000 Can't find object 00860004.PowerConverter.PowerConverterID Path: 00860004.PowerConverter.PowerConverterID, Type: Input Can't find object 00860004.PowerConverter.Input.InputID Path: 00860004.PowerConverter.Input.InputID, Type: Input Can't find object 00860004.PowerConverter.Input.FlowID Path: 00860004.PowerConverter.Input.FlowID, Type: Input Can't find object 00860004.PowerConverter.Input.PresentStatus.Good Path: 00860004.PowerConverter.Input.PresentStatus.Good, Type: Input Can't find object 00860004.PowerConverter.Input.Voltage Path: 00860004.PowerConverter.Input.Voltage, Type: Input Can't find object 00860004.PowerConverter.Input.Frequency Path: 00860004.PowerConverter.Input.Frequency, Type: Input Can't find object 00860004.PowerConverter.Output.OutputID Path: 00860004.PowerConverter.Output.OutputID, Type: Input Can't find object 00860004.PowerConverter.Output.FlowID Path: 00860004.PowerConverter.Output.FlowID, Type: Input Can't find object 00860004.PowerConverter.Output.Voltage Path: 00860004.PowerConverter.Output.Voltage, Type: Input Can't find object 00860004.PowerConverter.Output.Frequency Path: 00860004.PowerConverter.Output.Frequency, Type: Input Can't find object 00860004.PowerConverter.Output.PercentLoad Path: 00860004.PowerConverter.Output.PercentLoad, Type: Input Can't find object 00860004.PowerConverter.Output.PresentStatus.Overload Path: 00860004.PowerConverter.Output.PresentStatus.Overload, Type: Input Can't find object 00860004.PowerConverter.Output.PresentStatus.Boost Path: 00860004.PowerConverter.Output.PresentStatus.Boost, Type: Input Can't find object 00860004.PowerConverter.Output.PresentStatus.Buck Path: 00860004.PowerConverter.Output.PresentStatus.Buck, Type: Input Path: 00860004.PowerConverter.Output.PresentStatus.00840039, Type: Feature, Value: 0.000000 upsdrv_updateinfo... dstate_init: sock /var/state/ups/newhidups-auto open on fd 5 upsdrv_updateinfo... Waiting for notifications... Signal 2: exiting Closing device _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
