Ok, trying to clarify: The UPS I ordered was a F6C1100-UNV - what else can I let you know to identify the model? AFAIK Belkin just switched interals but kept the same model number.
The usbid should not be necessary, as the megatec_usb drive picked the UPS up without any special flags. All I wanted to achieve is to update the webpage :-). Just mentioning that some (or all newer ones) Belkins work with different drivers now. Let me know if I should give more infos. ~David On 5/22/07, Peter Selinger <[EMAIL PROTECTED]> wrote: > Alexander, > > I think we are talking to two different Davids here. The previous > poster, David Mohr, was describing how some models of the Belkin -UNV > series will only work with the megatec(_usb) drivers. He just didn't > mention which models. This is starting to be confusing. > > -- Peter > > Alexander I. Gordeev wrote: > > > > On Tue, May 22, 2007 at 07:35:27AM -0700, Big Wave Dave wrote: > > > I have a "F6C1100-UNV" running with the "belkinunv" driver. It has > > > been running for over a year and that configuration, and has been > > > quite stable. (nut-2.0.2 w/ serial connection) > > > > > > > Sorry, Peter, surely it was too early to claim this UPS supported by > > megatec_usb.. > > > > Dave, > > does this UPS have a USB interface? > > have you ever tried megatec_usb driver with this UPS? > > > > -- > > Alexander > > > > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
