Alexander I. Gordeev <[EMAIL PROTECTED]>:
> On Wed, 23 May 2007 02:35:17 +0400, Eric S. Raymond <[EMAIL PROTECTED]> wrote:
>
> > Peter Selinger <[EMAIL PROTECTED]>:
> >> One potential problem is that you are passing the parameters
> >> vendorid=0665 and subdriver=agiler when you start the driver manually,
> >> but you are passing no such parameters to upsdrvctl. You can put them
> >> into your ups.conf:
> >>
> >> [myups]
> >> driver = megatec_usb
> >> port = auto
> >> vendorid = 0665
> >> subdriver = agiler
> >
> > Ah, now that seemed to do the trick.
> >
>
> This can only be true if you are using an old version of megatec_usb
> binary (before revision 903) because I've added your UPS to the list of
> known devices (drivers/megatec_usb.c:99). It means that you don't have
> to specify these 2 variables.
Well -- maybe in theory. If you look at my trouble report, you'll see I built
from revision 909.
To eliminate future confusion, I suggest that the driver's banner message
should include the Subversion revision level it was built from. That way,
if there were pre-903 drivers lurking in my path somewhere, it would be
immediately obvious.
--
<a href="http://www.catb.org/~esr/";>Eric S. Raymond</a>
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
