Den torsdag 26.jul kl. 14:18 skrev Doug Parsons: > I have a plan to do the same thing. The approach I was going to > take is to > use several fake ups units that use contact closure style drivers. > The use a > contact closure from the temp sensor to send the fake UPS units > into LB > status. If the are fake units and all servers monitor for these in > addition > to the real ones. Then you can set your needed count to shut down > when the > temp goes high. You will need some of these relays to be feed from > the same > source as the UPS units so that in a real power failure the fake > units go > off line.
Do you really need a fake thing? cant you fake it in software and once the temperature goes too high you just run a script which hooks into NUT and sets the TemperaturUPS to NO battery or something and shut it down using that? I was planning to use lmsensors to monitor the temperature and then shutdown. JonB _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
