Steven Ellis wrote: > Carlos Rodrigues wrote: >> On 4/9/06, Criggie <[EMAIL PROTECTED]> wrote:
>>> caffeine:/etc/nut# upsdrvctl -vvv start >>> Network UPS Tools - UPS driver controller 2.0.2 >>> exec: /lib/nut/fentonups -a powerpal >>> Network UPS Tools - Fenton UPS driver 1.22 (2.0.2) >>> Unknown ups - please report this ID string: >>> #Dynamix UPS 1700D VER3.12 >>> Detected Unknown PS 1700D on /dev/ttyS0 >>> Communications with UPS lost - check cabling >>> Its a fairly new UPS model - where do I go from here? >> It looses the communication immediately? You may want to try the >> "powermust" driver (or "megatec" as it is called in the development >> branch). >> > Criggie - Did you make any progress with the megatec driver? Checking on > there appears to be some very similar models to the Dynamix units that > can use that driver. Yes - Megatec works perfectly in nut 2.2 The only thing that has been lost is "battery-charge" percentage. Megatec has introduced "UPS-temperature" but sadly it reads 0 for me. Apparently the same model is badged by many different suppliers. If it looks basically like this then it should work. http://cdlnz.com/productimages/jpegs/ups1700d.jpg -- Criggie http://criggie.dyndns.org/ _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
