Hello
I've got an Unitek UPS (650ipE) that use megatec driver ...
I'm running Ubuntu 7.04 with a 2.6.20 kernel and nut 2.0.5-1 package
Ubuntu by default use Udev and "hid", "usbhid", "evdev" kernel modules
are loaded automatically
The UPS is detected on system level but "upsdrvctl" can't access to
the device ...
Does anyone could give me an hand ?
I'm very frustraded because the device is detected :( ....
Regards
----
#ls -lh /dev/input
...
crw-rw---- 1 root root 13, 67 2007-09-21 19:28 /dev/input/event3
...
#ls -lh /dev/input/by-id/
lrwxrwxrwx 1 root root 9 2007-09-21 19:28
usb-Ver_1.0_USB_To_RS232_Interface__V1.0__BaudRate_2400bps-event-mouse
-> ../event3
-----
#cat /proc/bus/usb/devices
...
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0f03 ProdID=0001 Rev= 0.01
S: Manufacturer=Ver 1.0
S: Product=USB To RS232 Interface ( V1.0) BaudRate 2400bpsC:* #Ifs= 1
Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
...
----
---- /etc/nut/ups.conf ---
[unitek]
driver = megatec
port = /dev/input/event3
desc = "Server"
[EMAIL PROTECTED]:/dev/input# upsdrvctl -u root start
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools - Megatec protocol driver 1.5 (2.0.5)
Carlos Rodrigues (c) 2003-2006
tcgetattr(/dev/input/event3): Inappropriate ioctl for device
Driver failed to start (exit status=1)
----------
[EMAIL PROTECTED]:/dev/input# upsdrvctl -u root start
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools - Megatec protocol driver 1.5 (2.0.5)
Carlos Rodrigues (c) 2003-2006
tcgetattr(/dev/input/event3): Inappropriate ioctl for device
Driver failed to start (exit status=1)
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
