On 9/21/07, Carlos Rodrigues <[EMAIL PROTECTED]> wrote: > > The UPS is detected on system level but "upsdrvctl" can't access to > > the device ... > > The megatec driver only supports UPSes connected through the serial > port, not USB. If you have a serial port available and your UPS also > has this kind of connection, it should work though. > > For USB, the megatec_usb driver available in NUT 2.2.0 may support your UPS.
But you may try to use it with something like "port = /dev/ttyUSB0" first to see if it works. The output you pasted in your message shows the device as a "USB to RS232 interface", but these UPSes usually are more complicated than just the standard megatec protocol over a serial connection "emulated" over USB. But one never knows. -- Carlos Rodrigues _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
