I am trying to get this UPS talking with NUT (2.2.0) under Fedora 7/CentOS5.
I have searched the mailing list and found some infos: http://lists.alioth.debian.org/pipermail/nut-upsdev/2007-February/001799.html but I'm not really sure how that helps me. USB would be cool but I don't really need that, it just has to work. I have also found a document that shows the pinout of the com port (page 8) there: http://www.watfordcontrol.co.th/products/UPS/series_ae1/Catalog_A-19_A_E_engl(1999).pdf My question is, do I have to swap the TXD and RXD pins to get it working? I have tried to add the USB device address into the ups.conf and run the driver config tool thing. After a while it says: tcgetattr(/proc/bus/usb/004/002): Inappropriate ioctl for device After that I have tried the serial port, with a 1:1 cable, which didn't worked as well. The UPS has the SIC option installed (page 22 on the catalog) so maybe the invoke shutdown pin can be used. Thanks a lot Steve _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
