On 9/27/07, Stefan Teubel <[EMAIL PROTECTED]> wrote: > I am trying to get this UPS talking with NUT (2.2.0) under Fedora > 7/CentOS5. > > I have searched the mailing list and found some infos: > http://lists.alioth.debian.org/pipermail/nut-upsdev/2007-February/001799.html > but I'm not really sure how that helps me. USB would be cool but I don't > really need that, it just has to work. > > I have also found a document that shows the pinout of the com port (page > 8) there: > http://www.watfordcontrol.co.th/products/UPS/series_ae1/Catalog_A-19_A_E_engl(1999).pdf > My question is, do I have to swap the TXD and RXD pins to get it > working? > > I have tried to add the USB device address into the ups.conf and run the > driver config tool thing. After a while it says: > tcgetattr(/proc/bus/usb/004/002): Inappropriate ioctl for device > After that I have tried the serial port, with a 1:1 cable, which didn't > worked as well.
What driver are you using? You can try the "masterguard" driver, or "megatec". -- Carlos Rodrigues _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
