Hello All I just discoverd NUT and I'm lovin' it. I was very successful getting nut to monitor a CyberPower UPS along with having a Linux slave for a friend of mine. I've come to a snag on my personal system though. I currently have two Back-UPS XS 1200 APC UPSs, and I'm seeing notifications of low battery on both units.
Now, both units are not showing 'low battery' on the physical units, and they are definitely holding a charge. Also, I'm noticing that temp is 'off'. I was wondering if someone can help me out with this problem. I'm currently using the newhidups driver. Here is my output from upsc battery.charge: 1 battery.charge.low: 1 battery.charge.warning: 1 battery.date: 2001/00/00 battery.mfr.date: 1980/00/01 battery.runtime: 1 battery.runtime.low: 1 battery.temperature: -272 battery.type: Back-UPS XS 1200 FW battery.voltage: 1.0 battery.voltage.nominal: 1.0 driver.name: newhidups driver.parameter.port: /dev/ttyS1 driver.version: 2.0.5 driver.version.data: APC/CyberPower HID 0.9 driver.version.internal: 0.30 input.transfer.high: 1 input.transfer.low: 1 input.voltage: 1.0 input.voltage.nominal: 1 output.voltage: 1.0 output.voltage.nominal: 1.0 ups.beeper.status: disabled ups.delay.shutdown: 1 ups.firmware: 8.g1 .D ups.firmware.aux: g1 ups.load: 1.0 ups.mfr: American Power Conversion ups.mfr.date: 1980/00/01 ups.model: Back-UPS XS 1200 ups.power.nominal: 1 ups.serial: JB0548026372 ups.status: OL LB OVER RB BOOST ups.test.result: Done and passed Is there a better driver I should be using? Also, I get the same exact output with both UPSs Thanks in advance. hanji _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
