On Sat, 17 Nov 2007 16:28:10 +0100 (CET) "Arjen de Korte" <[EMAIL PROTECTED]> wrote:
> First, upgrade to at least nut-2.2.0. If that doesn't fix this, come back > here for instructions on how to run the driver in debug mode, so that we > can figure out what is going on. > > Best regards, Arjen > -- Hello Arjen Thanks for replying to my email. I updated to 2.2.0, and I'm running into the same problem, but also encountered other issues. After upgrading to 2.2.0 and using the usbhid-ups driver, I was not able to get a clean restart of upsd. /etc/init.d/upsd restart * Stopping upsd ... [ ok ] * Starting upsd ... Network UPS Tools upsd 2.2.0- listening on 0.0.0.0 port 3493 Can't connect to UPS [apc1] (usbhid-ups-apc1): Connection refused [ ok ] The only way to get this to work was by firing up the driver first, then starting upsd... /lib/nut/usbhid-ups -a apc1 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-) Detected a UPS: American Power Conversion/Back-UPS XS 1200 FW:8.g1 .D USB FW:g1 Using subdriver: APC/CyberPower HID 0.9 /etc/init.d/upsd start * Starting upsd ... Network UPS Tools upsd 2.2.0- listening on 0.0.0.0 port 3493 Connected to UPS [apc1]: usbhid-ups-apc1 But, now when I issue the upsc [EMAIL PROTECTED], I get the same values (low battery, etc) upsc [EMAIL PROTECTED] battery.charge: 1 battery.charge.low: 1 battery.charge.warning: 1 battery.date: 2001/00/00 battery.mfr.date: 1980/00/01 battery.runtime: 1 battery.runtime.low: 1 battery.temperature: -272 battery.type: Back-UPS XS 1200 FW battery.voltage: 1.0 battery.voltage.nominal: 1.0 driver.name: usbhid-ups driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.2.0- driver.version.data: APC/CyberPower HID 0.9 driver.version.internal: 0.30 input.transfer.high: 1 input.transfer.low: 1 input.voltage: 1.0 input.voltage.nominal: 1 output.voltage: 1.0 output.voltage.nominal: 1.0 ups.beeper.status: disabled ups.delay.restart: 1 ups.delay.shutdown: 1 ups.firmware: 8.g1 .D ups.firmware.aux: g1 ups.load: 1.0 ups.mfr: American Power Conversion ups.mfr.date: 1980/00/01 ups.model: Back-UPS XS 1200 ups.power.nominal: 1 ups.productid: 0002 ups.serial: JB0612018831 ups.status: OL LB OVER RB BOOST ups.test.result: Done and passed ups.vendorid: 051d So not sure about the startup issue. I guess we'll need to proceed to driver debug? Thanks! hanji _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
