Hi Arjen > > My apologies fro drifting off topic in the other mailing list...:-) > > On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV > The "au" is for Australia I think. > "man belkinunv" states that F6C120-UNV is supported - and I assumed > that the "au" would not prevent this. > I plugged in the USB to gather the information you requested. My > intention was to use the serial connection and probably still is, > though if there is a solution via USB - I would certainly consider it. > > I tried "lsusb -W" (as suggested) but this seems an invalid option so > I assume you mean "lsusb -v" > Below is the relevant part of the output from "lsusb -v". The > specific items you mentioned are: idVendor 0x050d Belkin Components idProduct 0x0912 > > I had a look at the Belkin site recently - and it looks like the model > after mine comes in a couple of flavours - and they provide different > software for these two flavours - but my understanding is that my > (older) model is "single flavour"..:-) I think it is quite possible > that I have a more basic communication problem with my UPS. I am > relatively new to Linux - and may well have done something stupid, or > not done something sensible...:-) > > Many thanks for your help Arjen. > > Richard. > > > Bus 004 Device 002: ID 050d:0912 Belkin Components > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x050d Belkin Components > idProduct 0x0912 > bcdDevice 0.01 > iManufacturer 4 Belkin > iProduct 20 UPS > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 20mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Devices > bInterfaceSubClass 0 No Subclass > bInterfaceProtocol 0 None > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.11 > bCountryCode 33 US > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 801 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 248 > >
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
