Hi Tomas
Thanks for the offer of the fixed udev rules. Please do send - with any
instructions I might need to install it. I'll let you know how it goes.
It appears that my email address is published on this thread anyway.
BTW: You may have followed this thread from when I was trying to get it
going on the serial port - and that wasn't working either. Out of
interest - I checked the permissions on the serial port ttys0 - and they
did appear to be set as you said the USB port should. I assume that
means the serial port problem I had was something different. I probably
should try launching the serial driver (BelkinUnv) in debug mode to see
if I can find out what the problem is there. If I find anything - I will
also let you know.
Best regards and many thanks.
Richard.
Tomáš Smetana wrote:
On Tue, 27 Nov 2007 16:01:26 +0900
Richard Chapman <[EMAIL PROTECTED]> wrote:
Hi Tomas and Arjen
Thanks for your very expert assistance....
We are definitely getting close to solving this. Maybe there is a
packaging problem - or maybe there is a problem somewhere else in my
system.
If I track down the ups usb port - and change the permissions of the
/dev/bus/usb/xxx/yyy as suggested by Tomas - everything works fine -
as far as I can tell so far at least.
I have a fixed udev rules file (I can send it to you off-list) that
should fix the problem. Unfortunately I don't have a RHEL-5 system
with usb UPS anywhere around, so it may take some time for me to test
it. After I do so I'll push an updated package to EPEL.
As for the removal of nut from RHEL: I don't know anything else about
the decision than you do.
Regards.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
