I guess it's tied to vendor/product id probably all models e.g. 400/600/800 differ only in battery capacity and run the same firmware but I will ask them
On 4/8/08, Arjen de Korte <[EMAIL PROTECTED]> wrote: > > I just got reply from Cyberpower R&D department about the battery > > voltage correction formulae > > > >> responsibility of the vendor (CyberPower). If someone provides me with > >> the > >> correct conversion values, I'm willing to include this in the subdriver. > > > > Our software group provided the following > > > > Battery voltage = (Hid battery voltage) / 1.53 > > for example: > > 21.3 /1.53 = 13.9 (measured 13.6) > > > > Note, the tolerance is possible for each unit of UPS. > > It is not clear to me what the line above means. Do they mean all units of > the same model, or all CyberPower devices with ProductID=0x0501. We can > only do this in the latter case since the device provides no information > about the model, so all we can work with are VendorID and ProductID. > > Best regards, Arjen > > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
