On Wed, 16 Apr 2008 09:03:03 +0200 (CEST), Arjen de Korte wrote: > > > Works fine for me. Just one question though. The changelog says: > > > > Wed Apr 2 20:09:41 UTC 2008 / Arjen de Korte <[EMAIL PROTECTED]> > > > > - common/state.[ch]: make the command list sorted (so that commands > > will be listed in alphabetic order by upscmd) > > > > However, the output of upscmd is still not sorted for me: > > > > $ upscmd -l rs800 > > Instant commands supported on UPS [rs800]: > > > > test.panel.start - Start testing the UPS panel > > test.panel.stop - Stop a UPS panel test > > load.off.delay - Turn off the load with a delay (seconds) > > shutdown.stop - Stop a shutdown in progress > > shutdown.reboot - Shut down the load briefly while rebooting the UPS > > beeper.on - Obsolete (use beeper.enable) > > beeper.off - Obsolete (use beeper.disable or beeper.mute) > > beeper.enable - Enable the UPS beeper > > beeper.disable - Disable the UPS beeper > > beeper.mute - Temporarily mute the UPS beeper > > load.off - Turn off the load immediately > > load.on - Turn on the load immediately > > shutdown.return - Turn off the load and return when power is back > > shutdown.stayoff - Turn off the load and remain off > > $ > > > > Isn't it supposed to be sorted? > > Yes, it should be. Did you restart the server before running upscmd? Note > that the sorting is done by the driver, so if you start the server before > the driver has finished starting up, the list may still be unsorted as the > commands will then be added on the fly (as soon as they are confirmed by > the driver). In that case, the list will still be unsorted.
Ah, you're totally correct, I tested upscmd without restarting upsd. Now I restarted everything cleanly and the command list is sorted as expected: $ upscmd -l rs800 Instant commands supported on UPS [rs800]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) load.on - Turn on the load immediately shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.panel.start - Start testing the UPS panel test.panel.stop - Stop a UPS panel test $ Thanks and sorry for the noise. -- Jean Delvare _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
