> You're making this far more complex than needed. With the RPMs I sent you,
> I also included the source RPM for nut (which was built on openSUSE 10.3
> by the way). Extract that with
>
> rpm -Uvh nut-2.2.2-pre2.src.rpm
>
> and then rebuild the lot with
>
> rpmbuild -ba /usr/src/packages/SPECS/nut.spec
>
> There is also a command to do this in one go, but I don't remember this at
> the moment.
I just found it
rpmbuild --rebuild nut-2.2.2-pre2.src.rpm
should do the trick.
Best regards, Arjen
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
