Arjen de Korte ha scritto: > My mistake. I failed to notice the different productid of this device. > You should be able to connect to it by adding a couple of variables to > the ups.conf entry: > > [yunto] > driver = megatec_usb > port = auto > desc = "yunto q700" > subdriver = agiler-old > vendorid = 06da > productid = 0002 > > Sorry about the confusion. > > We won't be able to support this out of the box for now, since we > already have another driver that is using the same VID:PID > combination. Adding an another (incompatible) driver will break > existing installations that rely on a HAL addon that might be in use. > It could be done, by trying out both at the time of connecting, but > this will require merging the megatec_usb and bcmxcp_usb drivers > somehow. At runtime, this could then select the appropriate protocol > handler. > > Best regards, Arjen
Yes, now it seems working. Thank you very much!! Just an idea (obviously OT from the topic) but why not writing a dedicated driver and let users configure it in ups.conf? It seems to me the most obvious solution without breaking existing installations. Cheers, Dario "subbia" Cavallaro _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
