I have been running a Smart-UPS RT 3000 VA using nut successfully over
the 940-0095B cable for a couple of years.
I have just received a second unit, but it is slightly different in 3
ways that I have found so far.
1. It's a Smart-UPS RT 3000 XL
2. The 940-0095B cable now uses an RJ45 connector at the UPS end.
3. It now requires a baud rate of 9600 instead of the 2400 used previously.
Can anyone tell me if modifying drivers/apcsmart.c
void upsdrv_initups(void)
{
char *cable;
upsfd = ser_open(device_path);
ser_set_speed(upsfd, device_path, B2400);
to
void upsdrv_initups(void)
{
char *cable;
upsfd = ser_open(device_path);
ser_set_speed(upsfd, device_path, B9600);
all that is required in order to get nut to talk to it, or will other
things need changing?
Regards,
Richard
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
