> Here is more informations. I hope this can help. Tell me if you need other > information. > > Version : Network UPS Tools upsd 2.2.0- > Driver : usbhid-ups > Network UPS Tools: 0.28 USB communication driver 0.28 - core > 0.30 (2.2.0-)
Many improvements have been made to usbhid-ups since 2.2.0. You may want to upgrade, or at least check the ChangeLog to see what you might be missing. Try "upsrw u...@localhost" to see if your version of usbhid-ups has any options that might affect the low-battery charge setting. > [trixbox.logilys.net /]# upsc u...@localhost > battery.charge: 9 > battery.charge.low: 10 > battery.charge.warning: 50 > battery.date: not set > battery.mfr.date: 2008/11/25 > battery.runtime: 90 > battery.runtime.low: 120 > battery.type: PbAc > battery.voltage: 12.4 > battery.voltage.nominal: 12.0 > driver.name: usbhid-ups > driver.parameter.pollinterval: 2 > driver.parameter.port: auto > driver.version: 2.2.0- > driver.version.data: APC/CyberPower HID 0.9 > driver.version.internal: 0.30 > input.transfer.high: 139 > input.transfer.low: 92 > input.voltage: 122.0 > input.voltage.nominal: 115 > ups.beeper.status: enabled > ups.delay.shutdown: -1 > ups.firmware: 843.K1 .D > ups.firmware.aux: K1 > ups.load: 38 > ups.mfr: APC > ups.mfr.date: 2008/11/25 > ups.model: Back-UPS ES 550 > ups.productid: 0002 > ups.serial: 3B1808X13737 > ups.status: OL CHRG LB > ups.vendorid: 051d > > Thank you > > Christian, > > > -----Message d'origine----- > De : Charles Lepple [mailto:[email protected]] > Envoyé : 26 août 2009 20:13 > À : Christian Dubois > Cc : NUT user list > Objet : Re: [Nut-upsuser] Linux and the APC Back-UPS ES > > > On Aug 26, 2009, at 7:01 PM, Peter Selinger wrote: > >> Dear Christian, >> >> thanks for writing. I am no longer active in driver development, so I >> am forwarding your question to the NUT user list. The people on the >> list are very helpful. >> >> Best wishes, -- Peter >> >> Christian Dubois wrote: >>> >>> Hi there, I found this document on the internet and it was very >>> useful >>> for me (http://www.mscs.dal.ca/~selinger/ups/backups.html), thank >>> you. >>> >>> I successfully install and configure my ups over a Centos. My ups go >>> down on low battery when the power fail for a long period. >>> >>> But there is just a bug : my ups run out of battery before the end of >>> the shutdown process (a full shutdown take less than 2 minutes). >>> >>> Is there a way to "start the shutdown process earlier", or to >>> change the >>> battery.charge.low or battery.runtime.low variables? >>> >>> I try to set a FinalDelay to 0, but it doesn't help. >>> >>> Do you have any idea to help me? >>> >>> Thank you. > > Christian, > > Can you please post some more details, such as the version of NUT > which you are using, and which driver? -- - Charles Lepple _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
