[oops, forgot to change the subject line - please respond to this message instead]
On Thu, Aug 27, 2009 at 10:32 PM, Charles Lepple<[email protected]> wrote: >> Here is more informations. I hope this can help. Tell me if you need other >> information. >> >> Version : Network UPS Tools upsd 2.2.0- >> Driver : usbhid-ups >> Network UPS Tools: 0.28 USB communication driver 0.28 - core >> 0.30 (2.2.0-) > > Many improvements have been made to usbhid-ups since 2.2.0. You may > want to upgrade, or at least check the ChangeLog to see what you might > be missing. > > Try "upsrw u...@localhost" to see if your version of usbhid-ups has any > options that might affect the low-battery charge setting. > >> [trixbox.logilys.net /]# upsc u...@localhost >> battery.charge: 9 >> battery.charge.low: 10 >> battery.charge.warning: 50 >> battery.date: not set >> battery.mfr.date: 2008/11/25 >> battery.runtime: 90 >> battery.runtime.low: 120 >> battery.type: PbAc >> battery.voltage: 12.4 >> battery.voltage.nominal: 12.0 >> driver.name: usbhid-ups >> driver.parameter.pollinterval: 2 >> driver.parameter.port: auto >> driver.version: 2.2.0- >> driver.version.data: APC/CyberPower HID 0.9 >> driver.version.internal: 0.30 >> input.transfer.high: 139 >> input.transfer.low: 92 >> input.voltage: 122.0 >> input.voltage.nominal: 115 >> ups.beeper.status: enabled >> ups.delay.shutdown: -1 >> ups.firmware: 843.K1 .D >> ups.firmware.aux: K1 >> ups.load: 38 >> ups.mfr: APC >> ups.mfr.date: 2008/11/25 >> ups.model: Back-UPS ES 550 >> ups.productid: 0002 >> ups.serial: 3B1808X13737 >> ups.status: OL CHRG LB >> ups.vendorid: 051d >> >> Thank you >> >> Christian, >> >> >> -----Message d'origine----- >> De : Charles Lepple [mailto:[email protected]] >> Envoyé : 26 août 2009 20:13 >> À : Christian Dubois >> Cc : NUT user list >> Objet : Re: [Nut-upsuser] Linux and the APC Back-UPS ES >> >> >> On Aug 26, 2009, at 7:01 PM, Peter Selinger wrote: >> >>> Dear Christian, >>> >>> thanks for writing. I am no longer active in driver development, so I >>> am forwarding your question to the NUT user list. The people on the >>> list are very helpful. >>> >>> Best wishes, -- Peter >>> >>> Christian Dubois wrote: >>>> >>>> Hi there, I found this document on the internet and it was very >>>> useful >>>> for me (http://www.mscs.dal.ca/~selinger/ups/backups.html), thank >>>> you. >>>> >>>> I successfully install and configure my ups over a Centos. My ups go >>>> down on low battery when the power fail for a long period. >>>> >>>> But there is just a bug : my ups run out of battery before the end of >>>> the shutdown process (a full shutdown take less than 2 minutes). >>>> >>>> Is there a way to "start the shutdown process earlier", or to >>>> change the >>>> battery.charge.low or battery.runtime.low variables? >>>> >>>> I try to set a FinalDelay to 0, but it doesn't help. >>>> >>>> Do you have any idea to help me? >>>> >>>> Thank you. >> >> Christian, >> >> Can you please post some more details, such as the version of NUT >> which you are using, and which driver? > > > > > -- > - Charles Lepple > -- - Charles Lepple _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
