Hi Arjen, On Wed, 07 Oct 2009 15:53:58 +0200, Arjen de Korte wrote: > Citeren Jean Delvare <[email protected]>: > > > Arnaud, Arjen, anything else I can do to help? The USB sniffer I'm > > using is a shareware and I have only 11 days of use left. If you need > > more captures, or different decoding, or any additional data, please > > let me know quickly. > > > > Would it be difficult to implement what Charles described above and > > test it? > > What Charles suggested, is *very* difficult to implement. In the > usbhid-ups driver, NUT commands have a one-to-one mapping to HID > reports. I'm currently lacking the time to code this.
Oh well, too bad. > You could try the latest version from the trunk, where I mapped the > existing commands for other APC devices to the HID path yours seems to > be using. Although this doesn't follow the output from usbsnoop, it > might just happen to work (YMMV). I'm testing it now. The new driver indeed shows new commands: test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test But upscmd fails with: # upscmd rs800 -u admin test.battery.start.quick Error: old command names are not supported I am running the usbhid-ups driver from SVN and upscmd from SVN too, but upsd and upsmon are from 2.4.1. Do I also have to upgrade either or both of upsd and upsmon to SVN as well? Thanks, -- Jean Delvare _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
