Citeren Arjen de Korte <[email protected]>: > Somehow reading the report descriptor fails, either due to a problem > in the UPS or in the libusb library (assuming you ran the above > command as root and no other application was using the UPS at the > time). I have no idea how to locate which one is the culprit, let > alone find a way to work around this. Unless you can make the above > command work, there is no way to support this device in NUT.
It may not be applicable here but just in case - you do not happen to be running NUT USB drivers on a virtualized system, are you? This won't work, since this won't provide the full access we need to the underlying interface. Best regards, Arjen -- Please keep list traffic on the list _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser Arjen, Actually it does apply. This is an Ubuntu machine on ESXi. To get around the difficulties with USB passthrough, I'm using USB Redirector software from Incentives Pro. I was happy when I found that I was actually communicating with the device, but was weary that it might not work with NUT. Apparently it won't. Why these units were purchased without SNMP/web cards is beyond me. I guess I'll have to beg and plead for them to be purchased. Thanks for all your help. If you think it might work with the above scenario, please let me know. -Greg _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
