Arjen, I've appended the output of upsc
I'll keep in mind your warning about the upsd server latching the FSD flag and requiring a restart, however I'm just running the packaged Ubuntu/Lucid version at this stage so I don't have too much flexibility. NUT seems to be set up as a service, so that it starts correctly on system boot, however it was probably assumed it would run until a system shutdown as the scripts don't handle stopping the service. When I : *sudo service nut stop* the NUT processes continue running. I doubt I'll have a chance to spend more time on this before Christmas. Regards, David da...@xeno:/etc/nut$ upsc 2200...@localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 3270 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: Value 2200E device.type: ups driver.name: usbhid-ups driver.parameter.offdelay: 60 driver.parameter.ondelay: 70 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.productid: 0501 driver.parameter.vendorid: 0764 driver.version: 2.4.3 driver.version.data: CyberPower HID 0.3 driver.version.internal: 0.34 input.transfer.high: 263 input.transfer.low: -96 input.voltage: 240.0 input.voltage.nominal: 230 output.voltage: 240.0 ups.beeper.status: enabled ups.delay.shutdown: 20 ups.delay.start: 30 ups.load: 14 ups.mfr: CPS ups.model: Value 2200E ups.productid: 0501 ups.realpower.nominal: 296 ups.status: FSD OL ups.test.result: Done and passed ups.timer.shutdown: -60 ups.timer.start: 0 ups.vendorid: 0764 _______________________________________________
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
