Arjen de Korte <nut+users <at> de-korte.org> writes: > > Citeren Ritchie <rotarn <at> gmx.de>: > > > I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. > > [...] > > > I am missing the command "shutdown.return' ? > > Does the ups not support this command ? > > It might support it, but not in the USB HID PDC paths that we > recognize. If this is supported by this UPS, it is probably in a > vendor specific path. Unless someone is able to provide the mapping, > we have no idea which one. > > Search the archives for more information about this issue. It has > popped up several times over past few years. Sadly nobody has reported > the solution to this and since none of the active NUT developers owns > such a device, this likely is going to stay that way. > > Best regards, Arjen
Arjen, I have been using usb APC units (CS 500 and SmartUPS 1000) with nut for some 6 years. I got this to work after extensive trawling of the net and found a fix involving changing the source and recompiling usbhid-ups (or hidups as it used to be). Now the bad news. Although I am still using the recompiled version of hidups and (64 bit) usbhid-ups, I have stupidly lost the source and my notes. :-( Is it any use to you to have the executables? This has been driving me nuts for the last week, as I now have another CS 500 to install, and only a 5 year old version of hidups to do it with! Regards, Kevin. _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
