Thanks a bunch, that worked like a charm :) But now I've got another question... After I run commands (tests) with upscmd, where do I see the results?
Ran a battery test check and it did not give any output. Thanks in advance. On Thu, Mar 10, 2011 at 8:25 AM, Arjen de Korte <[email protected]>wrote: > Citeren Garðar Arnarsson <[email protected]>: > > > I have defined the user in the /etc/ups/upsd.users >> >> 74 [gardar] >> 75 password = hidden >> 76 allowfrom = local >> 77 actions = SET >> 78 instcmds = ALL >> 79 [local_mon] >> 80 password = hidden >> 81 allowfrom = localhost >> 82 upsmon master >> >> Device and driver info: >> >> device.mfr: Inform >> device.model: SINUS1KURM >> device.type: ups >> driver.name: blazer_ser >> driver.version: 2.6.0 >> driver.version.internal: 1.51 >> >> >> What am I doing wrong? >> > > Did you check your syslog lately? The 'allowfrom' keyword is no longer used > (since a couple of versions actually) and has been replaced by tcp-wrappers, > which most likely is compiled in the version you're using. If there is a > blanket 'deny all' in /etc/hosts.allow, this requires you to setup access > permissions through /etc/hosts.allow. See the UPGRADING document, 'man 8 > upsd' and 'man 5 hosts_access'. Adding something like > > upsd : garder@localhost : ALLOW > > should work. > > Best regards, Arjen > -- > Please keep list traffic on the list (off-list replies will be rejected) > > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser -- Garðar Arnarsson kerfisstjóri Giraffi sf. [email protected] http://gardar.giraffi.net
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
