Thanks for clearing that out, I was going to do a battery test because I was afraid that my batteries might be dying but as it turns out one of the batteries had a loose plug, fixed that and the ups is running strong :)
>Only if the UPS finds that the battery needs to be replaced it will report the 'RB' status (replace battery). If it doesn't, all is well. The Q1 >protocol that is used by your UPS doesn't support more verbose messages (and neither does it report runtime or charge capacity) so there is >nothing more to report. When using the software supplied from the manufacturer I do see runtime and charge capacity messages. Best regards -Gardar On Fri, Mar 11, 2011 at 7:28 AM, Arjen de Korte <[email protected]>wrote: > Citeren Garðar Arnarsson <[email protected]>: > > Thanks a bunch, that worked like a charm :) >> > > Glad to hear that. > > > But now I've got another question... After I run commands (tests) with >> upscmd, where do I see the results? >> > > You don't. > > > Ran a battery test check and it did not give any output. >> > > Only if the UPS finds that the battery needs to be replaced it will report > the 'RB' status (replace battery). If it doesn't, all is well. The Q1 > protocol that is used by your UPS doesn't support more verbose messages (and > neither does it report runtime or charge capacity) so there is nothing more > to report. > > > Best regards, Arjen > -- > Please keep list traffic on the list (off-list replies will be rejected) > > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > -- Garðar Arnarsson kerfisstjóri Giraffi sf. [email protected] http://gardar.giraffi.net
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
