Hello, I am new to UPS stuff, please be patient with me ;-)
Archlinux i686, kernel 3.0-ARCH #1 SMP PREEMPT. nut 2.6.1 installed from source via Arch's AUR repository. Mother board GA D525TUD with two serial ports, both enabled in BIOS. I got some old Orvaldi 520 PL UPS [1], which is supposed to be supported by the vendor [2] with sw called UPSmart. The statically compiled i386 binary ran but did not detect the UPS. I also tried openupsmart [2] (obsolete now), but UPS was not detected. Since NUT compatibility list shows some success with blazer_ser driver for some other Orvaldi UPS, I gave it a try on both ttyS0 and ttyS1 - but no success (see the log below). I have also read about the cable variants and their configuration in NUT - Orvaldi uses some special serial cable with pins like shown here [4], which is not described on NUT doc pages. If there is any chance it could be supported by NUT, can anybody give some idea how to move on? Regards, Milan [1] http://orvaldi.pl/index.php/pl/product_catalog/product_view/1/6 [2] http://en.orvaldi.com/index.php/en/article_constant/21 [3] http://openupsmart.sourceforge.net/ [4] http://www.orvaldi.com.pl/2/file/DB9_pod_UPSmart.zip Log produced by blazer_ser: # /usr/bin/blazer_ser -DDD -a orvaldi Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.1) 0.000000 debug level is '3' 0.100934 Trying megatec protocol... 0.101133 send: Q1 1.102312 read: timeout 1.102365 blazer_status: short reply 1.102385 Status read 1 failed 1.102495 send: Q1 2.103575 read: timeout 2.103624 blazer_status: short reply 2.103643 Status read 2 failed 2.103771 send: Q1 3.104865 read: timeout 3.104915 blazer_status: short reply 3.104934 Status read 3 failed 3.104951 Trying mustek protocol... 3.105076 send: QS 4.106150 read: timeout 4.106195 blazer_status: short reply 4.106215 Status read 1 failed 4.106321 send: QS 5.107395 read: timeout 5.107442 blazer_status: short reply 5.107462 Status read 2 failed 5.107571 send: QS 6.108643 read: timeout 6.108689 blazer_status: short reply 6.108708 Status read 3 failed 6.108726 Trying megatec/old protocol... 6.108832 send: D 7.109906 read: timeout 7.109954 blazer_status: short reply 7.109974 Status read 1 failed 7.110083 send: D 8.111150 read: timeout 8.111190 blazer_status: short reply 8.111211 Status read 2 failed 8.111312 send: D 9.112375 read: timeout 9.112423 blazer_status: short reply 9.112443 Status read 3 failed 9.112461 No supported UPS detected -- http://www.milan-knizek.net/ About linux and photography (Czech only) O linuxu a fotografování _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
