Hi Milan 2011/8/26 Milan Knížek <[email protected]>
> Hello, > > I am new to UPS stuff, please be patient with me ;-) > > Archlinux i686, kernel 3.0-ARCH #1 SMP PREEMPT. > nut 2.6.1 installed from source via Arch's AUR repository. > Mother board GA D525TUD with two serial ports, both enabled in BIOS. > > I got some old Orvaldi 520 PL UPS [1], which is supposed to be > supported by the vendor [2] with sw called UPSmart. The statically > compiled i386 binary ran but did not detect the UPS. > > I also tried openupsmart [2] (obsolete now), but UPS was not detected. > > Since NUT compatibility list shows some success with blazer_ser driver > for some other Orvaldi UPS, I gave it a try on both ttyS0 and ttyS1 - > but no success (see the log below). > > I have also read about the cable variants and their configuration in NUT > - Orvaldi uses some special serial cable with pins like shown here [4], > which is not described on NUT doc pages. > > If there is any chance it could be supported by NUT, can anybody give > some idea how to move on? > > Regards, > Milan > > > [1] http://orvaldi.pl/index.php/pl/product_catalog/product_view/1/6 > [2] http://en.orvaldi.com/index.php/en/article_constant/21 > [3] http://openupsmart.sourceforge.net/ > [4] http://www.orvaldi.com.pl/2/file/DB9_pod_UPSmart.zip > <http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser> as per link [4], this is a dry contact UPS. so you need to use genericups cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
