Charles,
That was it! The permissions on
/devices/pci@0,0/pci103c,2a6c@2/*
Apparently they don't stick through a reboot. Thanks very
much, again.
Kostas
On 09/ 1/11 10:56 PM, Charles Lepple wrote:
On Sep 1, 2011, at 7:59 PM, Kostas Oikonomou wrote:
W.r.t. to Arnaud's suggestion, yes, I did that in order to
get the UPS working in the first place:
pfexec /usr/sbin/add_drv -i '"usb9ae,1008.10"' -m '* 0660
nut ups' ugen
I verified that this is still valid by doing "prtconf -v"
which yields (sorry for long output)
....
[trimmed]
The important thing is the 'compatible' entry above, which
includes 'usb9ae,1008.10'.
Anyhow, doesn't the fact that
pfexec /opt/nut/2.6.1/bin/usbhid-ups -DD -a eco550 -u root
works fine indicate that the ugen driver is ok?
The uhid -> ugen thing is only part of the problem. I
assumed that the "0660 nut ups" part of the command was for
permissions, but later you also mentioned another device node:
"Sorry for all these emails: finally, it was a permissions
problem on the usb device itself, i.e.
/devices/pci@0,0/pci103c,2a6c@2/*
Thanks very much for all your help."
I have no idea how to get those permissions to stick, though.
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
