Am 30.09.2011 16:23, schrieb Arnaud Quette:
Hi Simon,2011/8/30 Dwyer, Simon<[email protected]>:Hi All, I have got the Belkin F6S600auUSB UPS working with the blazer_usb driver. I pulled the power to the ups last night and it sent a message to the server saying it was on battery then ran for another 10 minutes and then sent a message to the server telling it to shut down, which it did. upswr did not return anything. [root@verity ~]# upsc ups battery.voltage: 13.50 battery.voltage.nominal: 12.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 2.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 242.9 input.voltage.fault: 242.9 input.voltage.nominal: 230 output.voltage: 237.5 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 0 ups.productid: 5161 ups.status: OL ups.temperature: 25.0 ups.type: offline / line interactive ups.vendorid: 0665 [root@verity ~]# upscmd -l ups Instant commands supported on UPS [ups]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop - Stop a shutdown in progress test.battery.start - Start a battery test test.battery.start.deep - Start a deep battery test test.battery.start.quick - Start a quick battery test test.battery.stop - Stop the battery test If any more info is needed just let me know.thanks for your report. I've just committed this entry in the trunk, r3264. for the sake of completion, could you also tell us what are the USB VendorID and ProductID? cheers, Arnaud
Stated above, same for the FSP EP-1K, except of temperature and battery voltage: battery.charge: 100 battery.runtime: 4000 battery.voltage: 27.40 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 8 driver.parameter.idleload: 30 driver.parameter.pollinterval: 15 driver.parameter.port: auto driver.parameter.productid: 5161 driver.parameter.runtimecal: 1200,100,3200,50 driver.parameter.vendorid: 0665 driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 50.1 input.frequency.nominal: 50 input.voltage: 231.2 input.voltage.fault: 231.2 input.voltage.nominal: 220 output.voltage: 231.2 ups.delay.shutdown: 30 ups.delay.start: 180 ups.load: 27 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive Cmds an Alarms untested but the EP-650 is already in the supported devices list. Can You confirm no usb req timeouts for Your device at 2sec polling for hours? Oct 1 06:24:28 fritz.box blazer_usb[11636]: Communications with UPS lost: status read failed! Oct 1 06:24:43 fritz.box blazer_usb[11636]: Communications with UPS lost: status read failed! Oct 1 06:24:58 fritz.box blazer_usb[11636]: Communications with UPS re-established USB-Sniffing the proprietary viewpower software I found it uses another protocol, with "QPI" requests 1/sec, sniff dumps attached (propably off list due to size limits). I will try some replays with a modified blazer_usb driver or dummy-ups and tools/device-recorder.sh. y tom
viewpower-fsp-ep-1k-usbsniff.tar.bz2
Description: application/bzip
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
