Hi, I'm forwarding your mail to the NUT list, because of a lack of time, and also since some others (Charles) already looked at this issue IIRC (related to the development branch 'netport').
cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ Le 10 nov. 2011 08:21, "Management" <[email protected]> a écrit : > > Hi, > > Please forgive me by emailing this to you. I am not sure you are the one who > also program the “Personal Solution_Pac” software. If you do, I have a > question on it. > I have MGE (eaton) EllipseMax 1500. I want to monitor the UPS remotely. The > device I use is a serial over IP . The setting looks like this : > > UPS --> Standard MGE serial cable --> serial over IP --> internet --> PC > running virtual com port & Personal Solution-Pac (windows xp) > > it can not work.... > > Some test I tried : > 1. UPS direct connect using serial cable (no serial over IP), it work on the > same PC ( the PSP software can monitor it) > > 2. using the same serial over IP device, connect to a serial com on a router, > I can remotely connect to the virtual com port and control the router ( on > the same PC) > > 3. little experiment: > ---> First, I connect the UPS directly to PC. Then I unplug the main power > of the UPS to simulate electricity power is down. The PSP software start a > warning that power is down in every 1 minute. Now, I switch the connection > of the UPS right away from PC to the serial over IP device ( that already > standby). Switch the PSP to use the virtual port.... now somehow, the PSP > will still warning me about the power down for another 2 warning... then it > stop... > > 4. the serial over IP device (embeded Linux ) and the virtual port software, > they actually base on a open source http://com0com.sourceforge.net/ > > Any help on how PSP software works ? is there a way to test the serial port > on UPS using hyperterminal ? > > Any help I will be very appreciate it > > Thank you for reading > Handoko > You should contact Eaton software support. Arno _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
