Hi all, I just changed my old MGE ellipse for a evolution 850 (now eaton). I can connect using mge-shut (newmge-shut doesn't work). But I have a few issues. I lloked around on NUT web-site and googled with no luck. Using debian lenny on 2.6.18 kernel (due to some ISDN driver that doesn't work with earlier kernels) 1) the most annoying is that I cannot shutdown the UPS. here is a trace : > Network UPS Tools - MGE UPS SYSTEMS/SHUT driver 0.66 (2.2.2) > debug level is '2' > entering upsdrv_initups() > entering shut_ups_start() > > Communication with UPS established > entering shut_get_descriptor(n 21, 9) > shut_wait_ack(): ACK received > entering shut_get_descriptor(n 01, 18) > shut_wait_ack(): ACK received > Device Descriptor: > bLength: 0x12 > bDescriptorType: 0x01 > bcdUSB: 0x0110 > bDeviceClass: 0x00 > bDeviceSubClass: 0x00 > bDeviceProtocol: 0x00 > bMaxPacketSize0: 0x08 > idVendor: 0x0463 > idProduct: 0xffff > bcdDevice: 0x0100 > iManufacturer: 0x01 > iProduct: 0x02 > iSerialNumber: 0x03 > bNumConfigurations: 0x01 > > entering shut_get_descriptor(n 22, 1811) > shut_wait_ack(): ACK received > Unable to get Report Descriptor
If I put more "D", I see it stucks on "need more data!" like this : > need more data (1691)! > Receive: (2 bytes) => 04 88 > Receive: (8 bytes) => 10 b1 82 c0 05 84 09 11 > shut_checksum: 7a => OK > sent: (1 bytes) => 06 > need more data (1683)! 2) I tried to set some variables. The drivers accept to do it (upsrw) but the actually do not change. some change but not with the value I set in the command and come back to their initial value after a few seconds. Any help appreciated. Laurent _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
