2012/2/21 Laurent Lesage <[email protected]>: > Hi all, Bonjour Laurent,
> I just changed my old MGE ellipse for a evolution 850 (now eaton). I can > connect using mge-shut (newmge-shut doesn't work). But I have a few > issues. I lloked around on NUT web-site and googled with no luck. > Using debian lenny on 2.6.18 kernel (due to some ISDN driver that > doesn't work with earlier kernels) > 1) the most annoying is that I cannot shutdown the UPS. here is a trace : >> Network UPS Tools - MGE UPS SYSTEMS/SHUT driver 0.66 (2.2.2) >> debug level is '2' >> entering upsdrv_initups() >> entering shut_ups_start() >> >> Communication with UPS established >> entering shut_get_descriptor(n 21, 9) >> shut_wait_ack(): ACK received >> entering shut_get_descriptor(n 01, 18) >> shut_wait_ack(): ACK received >> Device Descriptor: >> bLength: 0x12 >> bDescriptorType: 0x01 >> bcdUSB: 0x0110 >> bDeviceClass: 0x00 >> bDeviceSubClass: 0x00 >> bDeviceProtocol: 0x00 >> bMaxPacketSize0: 0x08 >> idVendor: 0x0463 >> idProduct: 0xffff >> bcdDevice: 0x0100 >> iManufacturer: 0x01 >> iProduct: 0x02 >> iSerialNumber: 0x03 >> bNumConfigurations: 0x01 >> >> entering shut_get_descriptor(n 22, 1811) >> shut_wait_ack(): ACK received >> Unable to get Report Descriptor > > If I put more "D", I see it stucks on "need more data!" like this : >> need more data (1691)! >> Receive: (2 bytes) => 04 88 >> Receive: (8 bytes) => 10 b1 82 c0 05 84 09 11 >> shut_checksum: 7a => OK >> sent: (1 bytes) => 06 >> need more data (1683)! > 2) I tried to set some variables. The drivers accept to do it (upsrw) > but the actually do not change. some change but not with the value I set > in the command and come back to their initial value after a few seconds. > > Any help appreciated. sure, but I need more info. first, issue (1) means that the driver can't start, while (2) implies that the driver is started... is (1) a repeatable issue? or is is only that when you're trying to shutdown the UPS (Ie 'upsdrvctl shutdown' or 'mge-shut -k ...'), it fails? can you please send back a full trace, with debug level 5 (Ie -DDDDD), in compressed form? Finally, note that 2.2.2 is quite oldish now, so you may also consider an update. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
