On Jun 15, 2012, at 1:12 PM, deadrabbit wrote: > I'm trying to get a SMART2200CRMXL to work with nut, using a USB > cable. tripplite_usb -a upsname returns: > > Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) > Warning: This is an experimental driver. > Some features may not function correctly. > > No matching USB/HID UPS found > > My system info: > CentOS 5.5 > nut installed from repo > upsd version 2.2.2 > TrippLite SMART2200CRMXL > (http://www.tripplite.com/en/products/model.cfm?txtModelID=3825)
[...] > Checking device (09AE/3014) (003/003) > - VendorID: 09ae > - ProductID: 3014 > - Manufacturer: unknown > - Product: unknown > - Serial Number: unknown > - Bus: 003 > Trying to match device > Device does not match - skipping This is your UPS, but it is actually covered by the usbhid-ups driver (tripplite_usb only handles Product ID 0001). I think later versions of NUT will print a message to that effect. Also, I don't know that usbhid-ups knows about your model in v2.2.2, but you can try it. If not, you probably need to upgrade to at least NUT v2.4.0 or later. I think there are some RHEL/Centos RPMs floating around. -- Charles Lepple clepple@gmail _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
