Thanks for the suggestion. Trying usbhid-ups results in an error suggesting that a newer version of NUT may support it, so I'll give that a try.
On Sat, Jun 16, 2012 at 3:57 AM, Charles Lepple <[email protected]> wrote: > On Jun 15, 2012, at 1:12 PM, deadrabbit wrote: > >> I'm trying to get a SMART2200CRMXL to work with nut, using a USB >> cable. tripplite_usb -a upsname returns: >> >> Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) >> Warning: This is an experimental driver. >> Some features may not function correctly. >> >> No matching USB/HID UPS found >> >> My system info: >> CentOS 5.5 >> nut installed from repo >> upsd version 2.2.2 >> TrippLite SMART2200CRMXL >> (http://www.tripplite.com/en/products/model.cfm?txtModelID=3825) > > [...] > >> Checking device (09AE/3014) (003/003) >> - VendorID: 09ae >> - ProductID: 3014 >> - Manufacturer: unknown >> - Product: unknown >> - Serial Number: unknown >> - Bus: 003 >> Trying to match device >> Device does not match - skipping > > This is your UPS, but it is actually covered by the usbhid-ups driver > (tripplite_usb only handles Product ID 0001). I think later versions of NUT > will print a message to that effect. > > Also, I don't know that usbhid-ups knows about your model in v2.2.2, but you > can try it. If not, you probably need to upgrade to at least NUT v2.4.0 or > later. I think there are some RHEL/Centos RPMs floating around. > > -- > Charles Lepple > clepple@gmail > > > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
