Dear Sirs,I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to use it to power FreeBSD 9.0-Rel server. Of fortunately I have problem with recommended driver - mge-utalk, nut 2.6.4 (installed from FreeBSD Ports).
I get messages: Could not get multiplier table: using raw readings. and updateinfo: Cannot update system status
I saw similar thread on mailing list with no exact answer.
My ups.conf file reads:
[mge]
driver = mge-utalk
port = /dev/cuau0
desc = "Pulsar ESV"
pollinterval = 20
I also attach zipped output from
mge-utalk -DDDDD -a mge
To verify my UPS, RS232 cable and computer COM port I installed Eaton
Personal Solution Pack for Windows. It works very well with hte UPS.
Thanks in advance for your help! Best wishes, Ivo
Output.tar.gz
Description: GNU Zip compressed data
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
