Windows 7 Pro x64 Eaton 3S550 (brand new, battery mfg 8/15/2012) NUT 2.6.5-3
ups.status: OL CHRGCHRG was present even though it has been plugged in a few days turned on and battery.charge was 100%.
Log includes me running upsc and removing power long enough to see that battery.charge will decrease.
This UPS doesn't have controlled outlets despite what the upsc output says. ---I've come across an undocumented feature on this UPS. Holding down the power button when the UPS is off seems to put it into some kind of config mode. If it's a sensitivity adjustment, NUT is not reporting it.
It says it does a self-test when turned on, but it doesn't appear to be going on-battery. I'm used to APC UPS's where holding down the button does a self-test, so that's why I stumbled onto that.
Now I don't know what I might have changed. Tomorrow I'll go see what Eaton software I should DL and try that, unless someone enlightens me before I get to that.
---I had to reinstall to get a proper usb_device.inf. Is there an easier way to regenerate that file when dealing with multiple UPS types on a test system?
---I noticed that NUT doesn't provide a way to update the battery date on UPS's which I've been able to previously with other software. I assume the bad battery warning is unaffected by this parameter?
Thanks!
Eaton 3S550.7z
Description: Binary data
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
