another attempt: # upsd Network UPS Tools upsd 2.6.5 fopen /var/db/nut/upsd.pid: No such file or directory listening on 127.0.0.1 port 3493 listening on ::1 port 3493 Can't connect to UPS [senpro] (riello_ser-senpro): No such file or directory # ls -la /var/db/nut/
total 12 drwx------ 2 _ups wheel 512 Jul 30 10:22 . drwxr-xr-x 10 root wheel 512 Jul 29 16:41 .. -rw-r--r-- 1 _ups wheel 5 Jul 30 10:22 upsd.pid # ls -la /usr/local/bin/riello_ser -rwxr-xr-x 1 root bin 161978 Jul 30 09:46 /usr/local/bin/riello_ser On Tue, Jul 30, 2013 at 10:21 AM, Pavel Potcheptsov (EKTOS) <[email protected]>wrote: > Here is what I did: > # cd /root/nut/ # nut here it's checkouted > repository > # ./configure --with-user=_ups --with-group=_ups > # cd drivers/ > # make riello_ser > # chgrp bin riello_ser > # cp riello_ser /usr/local/bin # here I copied builder driver to folder > where nut-package will store their files/drivers > # pkg_add nut-2.6.5p1 > # ls -la /dev/tty00 > crw-rw---- 1 _ups _ups 8, 0 Jul 30 10:05 /dev/tty00 > # ls -la /usr/local/ups/etc/ > total 72 > drwxr-xr-x 2 root wheel 512 Jul 30 10:02 . > drwxr-xr-x 7 root wheel 512 Jul 29 12:35 .. > -rw-r--r-- 1 _ups wheel 1545 Jul 30 09:22 nut.conf > -rw------- 1 _ups wheel 3901 Jul 30 09:23 ups.conf > -rw------- 1 _ups wheel 2744 Jul 29 16:41 upsd.conf > -rw------- 1 _ups wheel 2130 Jul 30 09:48 upsd.users > -rw------- 1 _ups wheel 11904 Jul 30 09:49 upsmon.conf > -rw-r--r-- 1 _ups wheel 3895 Jul 29 16:41 upssched.conf > -rw-r--r-- 1 _ups wheel 1420 Jul 29 16:41 upsset.conf > # grep -v '^#' > nut.conf > > MODE=standalone > # grep -v '^#' > ups.conf > > [senpro] > driver = riello_ser > port = /dev/tty00 > # grep -v '^#' upsd.conf > # grep -v '^#' > upsd.users > > [ups_] > password = password > upsmon master > # grep -v '^#' > upsmon.conf > > MONITOR senpro@localhost 1 ups_ password master > ..skipped.. > # upsdrvctl start > Network UPS Tools - UPS driver controller 2.6.5 > Network UPS Tools - Riello serial driver 0.02 (2.6.5-183-ga074844) > Warning: This is an experimental driver. > Some features may not function correctly. > > Connected to UPS GPSER on /dev/tty00 with baudrate 1200 > # /etc/rc.d/upsd start > upsd(ok) > # /etc/rc.d/upsmon > start > > upsmon(ok) > > > Broadcast Message from [email protected] > > ((not a tty)) at 9:58 > ... > > > Communications with UPS senpro@localhostlost > > > > > Broadcast Message from [email protected] > > ((not a tty)) at 9:58 > ... > > > UPS senpro@localhost is unavailable > # ls -la /var/state/ups/ > total 12 > drwxr-xr-x 2 _ups _ups 512 Jul 30 10:08 . > drwxr-xr-x 3 _ups _ups 512 Jul 30 09:53 .. > srw-rw---- 1 _ups _ups 0 Jul 30 09:57 riello_ser-senpro > -rw-r--r-- 1 _ups _ups 6 Jul 30 09:57 riello_ser-senpro.pid > # upsc senpro@localhost > Error: Driver not connected > # ps -aux | grep ups > _ups 15251 0.0 0.0 488 892 ?? Ss 9:57AM 0:00.83 > /usr/local/bin/riello_ser -a senpro > _ups 5765 0.0 0.1 556 1160 ?? Ss 9:57AM 0:00.02 > /usr/local/sbin/upsd > root 24549 0.0 0.1 632 1192 ?? Is 9:58AM 0:00.01 > /usr/local/sbin/upsmon > _ups 21333 0.0 0.1 640 1256 ?? S 9:58AM 0:00.01 > /usr/local/sbin/upsmon > # > dmesg > > OpenBSD 5.3 (GENERIC.MP) #58: Tue Mar 12 18:43:53 MDT 2013 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Celeron(R) CPU P4500 @ 1.87GHz ("GenuineIntel" 686-class) > 1.87 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,POPCNT,LAHF,PERF,ITSC > real mem = 2003451904 (1910MB) > avail mem = 1959714816 (1868MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 11/27/09, SMBIOS rev. 2.6 @ 0xeb0c0 > (24 entries) > bios0: vendor American Megatrends Inc. version "4.6.3" date 01/06/2011 > bios0: ICP / iEi B186 > acpi0 at bios0: rev 3 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC SSDT MCFG HPET > acpi0: wakeup devices P0P1(S3) PEGP(S4) P0P2(S3) P0P3(S3) P0P4(S3) > P0P5(S3) PS2K(S3) PS2M(S3) BR20(S3) EUSB(S4) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) USBE(S4) USB4(S3) USB5(S3) USB6(S3) PEX0(S4) PEX1(S4) PEX2(S4) > PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) LAN2(S3) PEX7(S4) SLPB(S0) PWRB(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 133MHz > cpu1 at mainbus0: apid 4 (application processor) > cpu1: Intel(R) Celeron(R) CPU P4500 @ 1.87GHz ("GenuineIntel" 686-class) > 1.87 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,POPCNT,LAHF,PERF,ITSC > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (BR20) > acpiprt2 at acpi0: bus 1 (PEX0) > acpiprt3 at acpi0: bus -1 (PEX1) > acpiprt4 at acpi0: bus -1 (PEX2) > acpiprt5 at acpi0: bus -1 (PEX3) > acpiprt6 at acpi0: bus 2 (PEX4) > acpiprt7 at acpi0: bus 3 (PEX5) > acpiprt8 at acpi0: bus -1 (PEX6) > acpiprt9 at acpi0: bus -1 (PEX7) > acpicpu0 at acpi0: C1, PSS > acpicpu1 at acpi0: C1, PSS > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > bios0: ROM list: 0xc0000/0xfa00! 0xd0000/0x1000 0xd1000/0x1000 > 0xd2000/0x1000 > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 1867 MHz: speeds: 1862, 1729, 1596, 1463, 1330, > 1197, 1064, 931 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x12 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x12 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 > inteldrm0 at vga1: apic 0 int 16 > drm0 at inteldrm0 > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 0 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 0 int 17 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 0 int 17 > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), apic 0 int 16, address 00:18:7d:2a:f1:1c > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 4 > ppb2 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 0 int 16 > pci3 at ppb2 bus 3 > re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E > (0x2c00), apic 0 int 17, address 00:18:7d:2a:f1:1d > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4 > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 0 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa6 > pci4 at ppb3 bus 4 > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x06 > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: msi, AHCI 1.3 > scsibus0 at ahci0: 32 targets > cd0 at scsibus0 targ 4 lun 0: <Optiarc, DVD RW AD-7760H, 1.00> ATAPI > 5/cdrom removable > sd0 at scsibus0 targ 5 lun 0: <ATA, WDC WD800HLFS-75, 04.0> SCSI3 0/direct > fixed naa.50014ee00231af66 > sd0: 76293MB, 512 bytes/sector, 156250000 sectors > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 0 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: probed fifo depth: 15 bytes > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > com1: probed fifo depth: 15 bytes > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > com2: probed fifo depth: 15 bytes > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > rum0 at uhub2 port 3 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3 > rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:24:21:8b:7b:aa > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on sd0a (acd65066376089a0.a) swap on sd0b dump on sd0b > > > On Mon, Jul 29, 2013 at 3:40 PM, Charles Lepple <[email protected]> wrote: > >> On Jul 29, 2013, at 8:16 AM, Pavel Potcheptsov (EKTOS) wrote: >> >> > I also could built the driver that I need >> > # make riello_ser >> >> That should work, from the driver directory. It shouldn't depend on the >> man pages. The master branch in Git and 2.6.5 are close enough that you >> should be able to just copy the riello_ser driver into the directory where >> the 2.6.5 drivers were installed. >> >> > but I don't know is there way to include it in 2.6.5. >> >> That is left as an exercise for the reader... you could collect all of >> the patches for Riello support, and apply them to the 2.6.5 tree. >> >> As for asciidoc, you might need some additional dependencies. I think >> it's actually the a2x script in the asciidoc package: >> http://www.methods.co.nz/asciidoc/a2x.1.html#X1 >> >> -- >> Charles Lepple >> clepple@gmail >> >> >> >> > > > -- > > Best / С наилучшими пожеланиями > > > *Pavel Potcheptsov* > > LLC EKTOS-Ukraine > > System administrator > > 1, Academika Proskury > > Mobile UA: +38 050 3642391 > > Home UA: +380 572 931115 > > 61070 Kharkiv > > www.ektos.com.ua <http://www.ektos.net/> > > E-mail: > > [email protected] > > > Skype: potcheptsov.pavel > > > > -- > > Best / С наилучшими пожеланиями > > > *Pavel Potcheptsov* > > LLC EKTOS-Ukraine > > System administrator > > 1, Academika Proskury > > Mobile UA: +38 050 3642391 > > Home UA: +380 572 931115 > > 61070 Kharkiv > > www.ektos.com.ua <http://www.ektos.net/> > > E-mail: > > [email protected] > > > Skype: potcheptsov.pavel > -- Best / С наилучшими пожеланиями *Pavel Potcheptsov* LLC EKTOS-Ukraine System administrator 1, Academika Proskury Mobile UA: +38 050 3642391 Home UA: +380 572 931115 61070 Kharkiv www.ektos.com.ua <http://www.ektos.net/> E-mail: [email protected] Skype: potcheptsov.pavel
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
