I have downloaded this file and did ./configure --with-user=_ups --with-group=_ups and then make command stopped at: .... gcc -DHAVE_CONFIG_H -I. -I../include -I../include -I/usr/local/include -I/usr/local/include/libusb-1.0 -DSHUT_MODE -g -O2 -Wall -Wsign-compare -MT mge_shut-usbhid-ups.o -MD -MP -MF .deps/mge_shut-usbhid-ups.Tpo -c -o mge_shut-usbhid-ups.o `test -f 'usbhid-ups.c' || echo './'`usbhid-ups.c usbhid-ups.c: In function 'hid_ups_walk': usbhid-ups.c:1272: error: 'EPROTO' undeclared (first use in this function) usbhid-ups.c:1272: error: (Each undeclared identifier is reported only once usbhid-ups.c:1272: error: for each function it appears in.) *** Error 1 in drivers (Makefile:1314 'mge_shut-usbhid-ups.o') *** Error 1 in /root/nut-2.7.1-pre1 (Makefile:461 'all-recursive')
On Tue, Jul 30, 2013 at 5:00 PM, Charles Lepple <[email protected]> wrote: > On Jul 29, 2013, at 7:56 AM, Charles Lepple wrote: > > > On Jul 29, 2013, at 6:43 AM, Pavel Potcheptsov (EKTOS) wrote: > > > >> Hello list, > >> I have explored https://github.com/networkupstools/nut repository > >> and found that Riello UPS added into list of supported UPS. > >> But current package for most distribution it's nut-2.6.5 which > >> doesn't have Riello's models. > >> Do we need to wait next upcoming nut release to get start with Riello? > > > > We're not too far away from a release: > > > > https://github.com/networkupstools/nut/issues/37 > > > >> I tried to install from source but stuck: > > [...] > >> Using existing nut.conf.5 manual page, since 'asciidoc' was not found. > > > > We don't check the generated man pages into the Git repository, so the > easiest way to get around this is probably to just install asciidoc. > > > > At some point I will fix the Buildbot step which generates snapshot > tarballs with the generated man pages included. > > > > http://buildbot.networkupstools.org/public/nut/waterfall?show=Debian-x64-gcc > > > http://buildbot.networkupstools.org/~buildbot/cayman/snapshot/ra074844f88ca352780dd881b5fa3c435832d165e-36/nut-2.7.1-pre1.tar.gz > > -- > Charles Lepple > clepple@gmail > > > > -- Best / С наилучшими пожеланиями *Pavel Potcheptsov* LLC EKTOS-Ukraine System administrator 1, Academika Proskury Mobile UA: +38 050 3642391 Home UA: +380 572 931115 61070 Kharkiv www.ektos.com.ua <http://www.ektos.net/> E-mail: [email protected] Skype: potcheptsov.pavel
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
