Hi Charles. Thanks for your reply.
I have no idea about the original software, this UPS has never been working and nobody knows about it. I test with blazer_usb with no success, but I will try to get that nutdrv_qx, it is not in my Debian Wheezy distribution of Nut. I will take in acount to reset with power off in case commands goes wrong. Regards. -- Jose Angel Navarro Cortes email: [email protected] web: http://janc.es/ Usuario Linux: #49178 El 14.12.01 08:04:05 > Charles Lepple dijo: > On Dec 1, 2014, at 3:00 AM, [email protected] wrote: > > > I have a very nice working ups from: > > CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" > > Do you know what software was originally recommended for the UPS? > > Unfortunately, Phoenixtec seems to have made a lot of different USB-to-serial > adapters. > > The most likely driver is blazer_usb (or nutdrv_qx, which is newer). You may > need to shut down the UPS completely (turn power off, and unplug) if the > other drivers have sent commands that put the UPS into a bad state. > > -- > Charles Lepple > clepple@gmail > > > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
