I’m a new user of NUT and the OpenUPS - in the past I’ve used APC hardware and
apcupsd on Centos 6.
I’ve built NUT 2.7.2 from source but used the OpenUPS HID driver v0.4 that’s in
github. I’m using firmware version 1.5 on the openups which is the latest
published version; I’ve also tried 1.7 which Mini-box sent to me but reverted
to the published version. Their support seems a bit slow!
I’ve got NUT working OK and the upsd running, with upsmon working OK too - all
is well as long as I leave the power on, or the battery takes over but doesn’t
need to shut down the system!
But if I try to shut down the system using 'upsdrvctl shutdown’ I get a USB
error message - ‘Can’t claim USB device [04d8:doo4]:’ This looks like
permissions but I’ve set up UDEV and the users in accordance with the
instructions.
Also if the battery runs down, there is no communication from the UPS via USB -
the power just dies. I could use the motherboard toggle to shut down the
system, but then I can’t run pre-shutdown scripts.
I also can’t collect any data by upsrw (returns blank) or upscmd (no commands
available) - though these functions might not be implemented in the OpenUPS -
does anyone know?
Any help gratefully received!
Philip.
Can't claim USB device [04d8:d004]: driver 0.32
Can't claim USB device [04d8:d004]:
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
