Hi Charles, thank you VERY MUCH for all your hints.
> If you have a jumper wire handy, you can connect the PC's TxD to RxD I should have tried to connect from another computer in the first place. Or access another device known to work from this computer. It turned out that the shield I used to connect the mainboard connector to the PC case expected another mainboard pin layout. So all I had to do is to re-arrange the wires... See attached log. > open an issue on the DDL repository, and include the output of "upsc", > "upsrw", and "upscmd -l" Done: https://github.com/networkupstools/nut-ddl/issues/4 Please email me if I should provide/add anything else. Olav
// I could not get nut on my new server running dibian jessie to connect to my UPS Best Power Patriot Pro 750. // THIS is is a trail of my tests on a SECOND computer - so this shows what you see if all DOES work well. // added user to dialout group and logged out and back in $ setserial -g /dev/ttyS0 /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 $ stty -F /dev/ttyS0 speed 9600 baud; line = 0; -brkint -imaxbel $ sudo apt-get install nut Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden zusätzlichen Pakete werden installiert: libupsclient3 nut-client nut-server Vorgeschlagene Pakete: nut-monitor nut-cgi nut-snmp nut-ipmi nut-xml Die folgenden NEUEN Pakete werden installiert: libupsclient3 nut nut-client nut-server 0 aktualisiert, 4 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 876 kB an Archiven heruntergeladen werden. Nach dieser Operation werden 5.345 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] Holen: 1 http://archive.ubuntu.com/ubuntu/ trusty/main libupsclient3 amd64 2.7.1-1ubuntu1 [60,0 kB] Holen: 2 http://archive.ubuntu.com/ubuntu/ trusty/main nut-client amd64 2.7.1-1ubuntu1 [87,2 kB] Holen: 3 http://archive.ubuntu.com/ubuntu/ trusty/main nut-server amd64 2.7.1-1ubuntu1 [609 kB] Holen: 4 http://archive.ubuntu.com/ubuntu/ trusty/main nut all 2.7.1-1ubuntu1 [120 kB] Es wurden 876 kB in 2 s geholt (416 kB/s). [...] $ sudo cat >>/etc/nut/ups.conf <<EOF [Best_Power_Patriot_Pro_750] driver = bestups port = /dev/ttyS0 EOF // added user to nut group and logged out and back in // all that's necessary for a DRIVER test should be there now // UPS device is OFF (neither plugged in nor switched on, but serial cable plugged in) $ /lib/nut/bestups -a Best_Power_Patriot_Pro_750 -DDDDD Network UPS Tools - Best UPS driver 1.06 (2.7.1) 0.000000 debug level is '5' 0.000881 send_to_all: SETINFO device.type "ups" 0.000931 send_to_all: SETINFO driver.version "2.7.1" 0.000959 send_to_all: SETINFO driver.version.internal "1.06" 0.000986 send_to_all: SETINFO driver.name "bestups" 17.267267 Unable to detect a Best/SOLA or Phoenix protocol UPS $ stty -F /dev/ttyS0 speed 2400 baud; line = 0; min = 1; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke $ setserial -g /dev/ttyS0 /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 // note that the port has been reconfigured // UPS is plugged, on and connected $ /lib/nut/bestups -a Best_Power_Patriot_Pro_750 -DDDDD Network UPS Tools - Best UPS driver 1.06 (2.7.1) 0.000000 debug level is '5' 0.000809 send_to_all: SETINFO device.type "ups" 0.000861 send_to_all: SETINFO driver.version "2.7.1" 0.000890 send_to_all: SETINFO driver.version.internal "1.06" 0.000918 send_to_all: SETINFO driver.name "bestups" 0.648605 get_ident: got [PRO,750,230,230,20.0,27.3] 0.648678 send_to_all: SETINFO input.voltage.nominal "230" 0.648715 send_to_all: SETINFO output.voltage.nominal "230" 0.648749 send_to_all: SETINFO ups.mfr "Best Power" 0.648766 send_to_all: SETINFO ups.model "Patriot Pro 750" 0.648783 send_to_all: SETINFO battery.voltage.nominal "24" Detected Best Power Patriot Pro 750 on /dev/ttyS0 0.749072 send_to_all: ADDCMD test.battery.start 0.749128 send_to_all: ADDCMD test.battery.stop 1.149812 send_to_all: SETINFO battery.voltage "27.5" 1.149863 send_to_all: SETINFO input.voltage "233.0" 1.149895 send_to_all: SETINFO output.voltage "233.0" 1.149919 send_to_all: SETINFO ups.load "000" 1.149940 send_to_all: SETINFO input.frequency "50.0" 1.149965 send_to_all: SETINFO battery.charge "100.0" 1.149990 send_to_all: SETINFO ups.status "OL" 1.150011 send_to_all: DATAOK 1.150112 dstate_init: sock /var/run/nut/bestups-Best_Power_Patriot_Pro_750 open on fd 5 1.150155 send_to_all: SETINFO driver.parameter.pollinterval "2" 1.150193 send_to_all: SETINFO device.mfr "Best Power" 1.150230 send_to_all: SETINFO device.model "Patriot Pro 750" ^C
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
