Dear list members, I'd like to setup my UPS in a way that it only shuts the server (including 5 VMs down if really necessary). We do have a rather stable power supply here, but there are multiple 200ms outages within a year and there also have been some that lasted more than half an hour. So: since the shudown is rather quick, I'd ideally set it to "shut down when only 20% battery left" (which should give at least five minutes power left, shutdown takes far less than one minute). BUT:
I'm not sure if what I did should suffice. I followed the manual [http://www.networkupstools.org/docs/user-manual.chunked/ar01s06.html#UPS_shutdown]. But I may not have understand it properly. If I interpret it correctly, the following upsmon.conf would be sufficient to monitor and to initiate a system shutdown. Or is it *necessary* to setup the NOTIFYMSG and NOTIFYFLAG lines? RUN_AS_USER nut MONITOR Best_Power_Patriot_Pro_750@localhost 1 upsmon SOMESECRET master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 I am unsure since I found that another UPS [http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups] seems to feature a power threshold ... > # upsc eaton@localhost > battery.charge: 89 > *battery.charge.low: 20* > ... ... but mine does not: > # upsc Best_Power_Patriot_Pro_750 > Init SSL without certificate database > battery.charge: 100.0 > battery.voltage: 27.5 > battery.voltage.nominal: 24 > device.mfr: Best Power > device.model: Patriot Pro 750 > device.type: ups > driver.name: bestups > driver.parameter.pollinterval: 2 > driver.parameter.port: /dev/ttyS0 > driver.version: 2.7.2 > driver.version.internal: 1.06 > input.frequency: 50.0 > input.voltage: 231.1 > input.voltage.nominal: 230 > output.voltage: 231.1 > output.voltage.nominal: 230 > ups.load: 000 > ups.mfr: Best Power > ups.model: Patriot Pro 750 > ups.status: OL So I wonder whether it triggers (at which point? when totally depleted?) IN TIME to enable a clean shutdown. Could someone please point me to where (or what for) to look to configure that? Or is it not necessary? Or is my UPS not capable of triggering based on power left and I must use a time based setup (sleep in notifycmd) shown in this [https://srackham.wordpress.com/2013/02/27/configuring-nut-for-the-eaton-3s-ups-on-ubuntu-linux/] article? Or should I really have a script as complicated as in this [http://rogerprice.org/NUT.html] article? I really wan to keep things as simple as possible... The next thing is, that it seems to be necessary to tweak shutdown procedures. I'm on jessie, does anyone know where the debian maintainer EXPECTS me to do so? (Or don't I have to?) I really would like to understand things that are necessary for a MINIMAL solution using my hardware. Any links, hints or help appreciated! Thanks, Olav P.S.: Yes, ups load is correct, it's still connected via serial cable ONLY.
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
