On Mittwoch, 22. Juni 2016 09:21 André wrote: > Hi list, > > (I think) I understand that in upsmon.conf, the MONITOR line ends with "master" or "slave". Basically if it's master it will wait for slaves to shut down and if it's slave it will signal the master to switch off the UPS after shutdown. > > To be able to monitor a network UPS as a slave, there must be a user in upsd.users on the master system. This user needs to have a setting named "upsmon" set. > > And this is where I'm confused - this setting has a parameter that must also be set to either " master" or "slave". What do I set this to? > > Regards, > André
Ok, I did some further testing and it seems that setting "upsmon slave" does not allow clients to connect, so when would I want to set it? _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
