> that string shows up here, among other places:
>
> https://github.com/networkupstools/nut/blob/master/drivers/nutdrv_qx.c#L764
>
> but if the upsilon screen isn't showing many values, I'm not sure if that
> version is going to help. Are there any other settings to select a
> different model or protocol?

Here is the output of
#/etc/upsilon/upsilon config

hope webmail client doesn't wrap

 (UPSilon) UPS Configuration Utility, Ver. 3.0
 Copyright(C) 2008 Mega System Technologies, Inc.      2016-09-16, 17:35 Fri.
+-----------------------------------------------------------------------------+
|        [d] System Shutdown Delay Time When AC Power Failed:  5.0 Min.   
   |
|        [b] System Shutdown Delay Time When Battery Low    :  1.0 Min.   
   |
|        [u] UPS Turn Off Delay Time                        :  3.0 Min.   
   |
|        [v] Battery Rating Voltage(if not provided by UPS) :  --- Volt.  
   |
|        [c] Communication Port: hid                                      
   |
|                                                                         
   |
|        [n] Shutdown Count Down Display: ON                              
   |
|        [l] Scheduling Function        : OFF                             
   |
|        [a] Turn off UPS after System Shutdown: YES                      
   |
|        [t] Time Scheduling(hh:mm)                                       
   |
|                                                                         
   |
|                    Sun.   Mon.   Tue.   Wed.   Thu.   Fri.   Sat.       
   |
|        Start-Up:  --:--  --:--  --:--  --:--  --:--  --:--  --:--       
   |
|        Shutdown:  --:--  --:--  --:--  --:--  --:--  --:--  --:--       
   |
|        [k] <<Change UPS Monitoring>> Monitor UPS from local serial port 
   |
|        [s] Save Configuration.                                          
   |
|        [q] Quit.                                                        
   |
+-----------------------------------------------------------------------------+
         Press the letters in brackets to select items.
         Press [+], [-], or [i], [m] to change values.
         Press [r] to redraw screen.

Here is the output of status
#/etc/upsilon/upsilon start
#/etc/upsilon/upsilon status

 (UPSilon) UPS Status Screen, Ver. 3.0    PS No Ac
 Copyright(C) 2008 Mega System Technologies, Inc.       2016-09-16, 17:37
Fri.
+-------------------------------------++--------------------------------------+
|  UPS Type          : N/A            ||   UPS Input Voltage: N/A         
   |
|  UPS Rating Voltage: UPS   Volt     ||  
|----|----|----|----|----|----|--  |
|  UPS Rating Current: No    Amp      ||   70   80   90  100  110  120 
130   |
|  UPS Line Frequency: N/A            ||                                  
   |
|  Communication Port: hid            ||   UPS Output Voltage: N/A        
   |
|                                     ||  
|----|----|----|----|----|----|--  |
|     Input AC Power : N/A            ||   70   80   90  100  110  120 
130   |
|     Battery Status : N/A            ||                                  
   |
|     UPS Functioning: N/A            ||   UPS Power Loading: N/A         
   |
|     Boost/Buck     : N/A            ||  
|----|----|----|----|----|----|--  |
|     UPS Temperature: N/A            ||   0    20   40   60   80  100 
120   |
|     UPS Self-Test  : N/A            ||                                  
   |
|                                     ||   UPS Battery Level: N/A         
   |
|  Count Down Function: ON            ||  
|----|----|----|----|----|----|--  |
|  Scheduling Function: OFF           ||   0    20   40   60   80  100 
120   |
|  Next Shutdown Time : ---  --:--    ||                                  
   |
|  Next Restart  Time : ---  --:--    ||   UPS Input Frequency: N/A       
   |
|  ACfail Shutdown Delay:  5.0 Min.   ||  
|----|----|----|----|----|----|--  |
|  UPS Turn Off Delay   :  3.0 Min.   ||   0    20   40   60   80   90 
100   |
+-------------------------------------++--------------------------------------+
 System: Linux[billmachine]                    Type 'r' to Redraw, Type
'q' to Quit.


I don't know how to select another protocol. I put hid after ltrace usage.

In monday I will try to try the windows version. The problem is that the
virtual machine is critical and I don't want to install software on it
(windows et all.).

Thanks

Regards

     Vassilis Virvilis


_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser

Reply via email to