On Wed, 18 Oct 2017, Drew Plaster wrote:
MASTER SYSTEM
nut.conf
MODE=netserver
ups.conf
[TOPAPC]
driver = usbhid-ups
port = auto
pollonly
serial = "IS1309002707"
desc = "TOPAPC"
[MIDAPC]
driver = usbhid-ups
port = auto
pollonly
serial = "IS1309001233"
desc = "MIDAPC"
[BOTAPC]
driver = usbhid-ups
port = auto
pollonly
serial = "IS1309001213"
desc = "BOTAPC"
Just to be sure that I understand your topology:
UPS TOPAPC, Data link to master, Power supply to master
UPS MIDAPC, Data link to master, Power supply to slave1
UPS BOTAPC, Data link to master, Power supply to slave2
Shutdown plan: When wall power fails for any one of the three UPS units,
they continue powering the master and the two slaves. When any one of the
three UPS units reaches the status [OB LB]. the two slaves are shut down,
and then the master is shutdown.
Is this correct?
Roger
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
