From: Alison Schofield <alison.schofi...@intel.com>
Exercise cxl list, libcxl, and driver pieces of the get poison list
pathway. Inject and clear poison using debugfs and use cxl-cli to
read the poison list by memdev and by region.
Signed-off-by: Alison Schofield <alison.schofi...@intel.com>
Reviewed-by: Dave Jiang <dave.ji...@intel.com>
---
test/cxl-poison.sh | 137 +++++++++++++++++++++++++++++++++++++++++++++
test/meson.build | 2 +
2 files changed, 139 insertions(+)
create mode 100644 test/cxl-poison.sh
diff --git a/test/cxl-poison.sh b/test/cxl-poison.sh
new file mode 100644
index 000000000000..2caf092db460
--- /dev/null
+++ b/test/cxl-poison.sh
@@ -0,0 +1,137 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2023 Intel Corporation. All rights reserved.
+
+. "$(dirname "$0")"/common
+
+rc=77
+
+set -ex
+
+trap 'err $LINENO' ERR
+
+check_prereq "jq"
+
+modprobe -r cxl_test
+modprobe cxl_test
+
+rc=1
+
+# THEORY OF OPERATION: Exercise cxl-cli and cxl driver ability to
+# inject, clear, and get the poison list. Do it by memdev and by region.
+
+find_memdev()
+{
+ readarray -t capable_mems < <("$CXL" list -b "$CXL_TEST_BUS" -M |
+ jq -r ".[] | select(.pmem_size != null) |
+ select(.ram_size != null) | .memdev")
+
+ if [ ${#capable_mems[@]} == 0 ]; then
+ echo "no memdevs found for test"
+ err "$LINENO"
+ fi
+
+ memdev=${capable_mems[0]}
+}
+
+create_x2_region()
+{
+ # Find an x2 decoder
+ decoder="$($CXL list -b "$CXL_TEST_BUS" -D -d root | jq -r ".[] |
+ select(.pmem_capable == true) |
+ select(.nr_targets == 2) |
+ .decoder")"
+
+ # Find a memdev for each host-bridge interleave position
+ port_dev0="$($CXL list -T -d "$decoder" | jq -r ".[] |
+ .targets | .[] | select(.position == 0) | .target")"
+ port_dev1="$($CXL list -T -d "$decoder" | jq -r ".[] |
+ .targets | .[] | select(.position == 1) | .target")"
+ mem0="$($CXL list -M -p "$port_dev0" | jq -r ".[0].memdev")"
+ mem1="$($CXL list -M -p "$port_dev1" | jq -r ".[0].memdev")"
+
+ region="$($CXL create-region -d "$decoder" -m "$mem0" "$mem1" |
+ jq -r ".region")"
+ if [[ ! $region ]]; then
+ echo "create-region failed for $decoder"
+ err "$LINENO"
+ fi
+ echo "$region"
+}
+
+# When cxl-cli support for inject and clear arrives, replace
+# the writes to /sys/kernel/debug with the new cxl commands.
+
+inject_poison_sysfs()
+{
+ memdev="$1"
+ addr="$2"
+
+ echo "$addr" > /sys/kernel/debug/cxl/"$memdev"/inject_poison
+}
+
+clear_poison_sysfs()
+{
+ memdev="$1"
+ addr="$2"
+
+ echo "$addr" > /sys/kernel/debug/cxl/"$memdev"/clear_poison
+}
+
+validate_poison_found()
+{
+ list_by="$1"
+ nr_expect="$2"
+
+ poison_list="$($CXL list "$list_by" --media-errors |
+ jq -r '.[].media_errors')"
+ if [[ ! $poison_list ]]; then
+ nr_found=0
+ else
+ nr_found=$(jq "length" <<< "$poison_list")
+ fi
+ if [ "$nr_found" -ne "$nr_expect" ]; then
+ echo "$nr_expect poison records expected, $nr_found found"
+ err "$LINENO"
+ fi
+}
+
+test_poison_by_memdev()
+{
+ find_memdev
+ inject_poison_sysfs "$memdev" "0x40000000"
+ inject_poison_sysfs "$memdev" "0x40001000"
+ inject_poison_sysfs "$memdev" "0x600"
+ inject_poison_sysfs "$memdev" "0x0"
+ validate_poison_found "-m $memdev" 4
+
+ clear_poison_sysfs "$memdev" "0x40000000"
+ clear_poison_sysfs "$memdev" "0x40001000"
+ clear_poison_sysfs "$memdev" "0x600"
+ clear_poison_sysfs "$memdev" "0x0"
+ validate_poison_found "-m $memdev" 0
+}
+
+test_poison_by_region()
+{
+ create_x2_region
+ inject_poison_sysfs "$mem0" "0x40000000"
+ inject_poison_sysfs "$mem1" "0x40000000"
+ validate_poison_found "-r $region" 2
+
+ clear_poison_sysfs "$mem0" "0x40000000"
+ clear_poison_sysfs "$mem1" "0x40000000"
+ validate_poison_found "-r $region" 0
+}
+
+# Turn tracing on. Note that 'cxl list --media-errors' toggles the tracing.
+# Turning it on here allows the test user to also view inject and clear
+# trace events.
+echo 1 > /sys/kernel/tracing/events/cxl/cxl_poison/enable
+
+test_poison_by_memdev
+test_poison_by_region
+
+check_dmesg "$LINENO"
+
+modprobe -r cxl-test
diff --git a/test/meson.build b/test/meson.build
index a965a79fd6cb..d871e28e17ce 100644
--- a/test/meson.build
+++ b/test/meson.build
@@ -160,6 +160,7 @@ cxl_events = find_program('cxl-events.sh')
cxl_sanitize = find_program('cxl-sanitize.sh')
cxl_destroy_region = find_program('cxl-destroy-region.sh')
cxl_qos_class = find_program('cxl-qos-class.sh')
+cxl_poison = find_program('cxl-poison.sh')
tests = [
[ 'libndctl', libndctl, 'ndctl' ],
@@ -192,6 +193,7 @@ tests = [
[ 'cxl-sanitize.sh', cxl_sanitize, 'cxl' ],
[ 'cxl-destroy-region.sh', cxl_destroy_region, 'cxl' ],
[ 'cxl-qos-class.sh', cxl_qos_class, 'cxl' ],
+ [ 'cxl-poison.sh', cxl_poison, 'cxl' ],
]
if get_option('destructive').enabled()
--
2.37.3
