http://defect.opensolaris.org/bz/show_bug.cgi?id=8309
Summary: Noi working network after boot of BFU
Classification: Development
Product: nwam
Version: unspecified
Platform: ANY/Generic
OS/Version: All
Status: NEW
Status Whiteboard: nwam1-build:2009-04-20
Severity: major
Priority: P2
Component: ON daemon
AssignedTo: nwam-dev at opensolaris.org
ReportedBy: dkenny at opensolaris.org
QAContact: nwam-dev at opensolaris.org
Created an attachment (id=1777)
--> (http://defect.opensolaris.org/bz/attachment.cgi?id=1777)
nwamd log.
I just tried to boot to the BFU 04/20, and I found that when I started up, it
didn't have any working network - this is a BE that hadn't previously been
booted with Phase 1 before the BFU, so was an upgrade scenario.
I have two interfaces :
- ath0
- myk0
While ath0 got plumbed, running nwamadm interact -v I didn't see any events or
request to select a network - and there are several in the office.
Although I had a physical cable connected to the network port (myk0), the
device wasn't plumbed at all.
Further investigation provided me with the attached event log.
Looking at the files created I didn't see a myk0 entry for the IP ncu.
I rebooted, and on reboot (also in the log around 09:38) - there are messages
that some items were not found, so were created. At this point there is now an
myk0 entry, and this is attempted to be connected to - but I shutdown this
quite quickly.
--
Configure bugmail: http://defect.opensolaris.org/bz/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug.
You are the assignee for the bug.
